Daewoo IC Forklifts West Valley City

Inspect a Forklift

There are more than 10,000 workplace injuries related to forklifts occur each year, according to OSHA and HRSDC reports. Many of these mishaps are caused by operator error. Lack of appropriate equipment maintenance and inspection causes numerous others. Forklift operation and maintenance is not just the cause of personal injuries, but also of damage to property. Forklifts could damage overhead pipes, sprinklers and building structures, and other equipment when improperly utilized. The following day by day inspections should be done in order to reduce the likelihood of forklift accidents.



Before inspecting different fluid levels turn off the engine. Inspect these fluids: hydraulic oil, fuel, engine oil, coolant and brake fluid. The tires also need to be inspected for signs of wear and tear. Check the tire air pressure. Check the forks' condition. The load backrest should be attached tightly. Do a visual inspection of the top-clip retaining heel and pin. Afterward carry out an inspection of the hydraulic hoses, mast chains, cables and stops. Ensure that both the overhead and finger guards are attached firmly.



LP forklifts have propane tanks that have to be inspected for signs of damage, rust or corrosion. Test the battery's electrolyte levels and charge. All belts should be inspected for wear. Check to make certain the owner's handbook is stored on-board the forklift in a storage compartment. Test the seat belt to make sure the latches are secure. Check the hood latch to ensure it is working as it should.



To make sure there are no unusual engine sounds, start the engine up and listen for any irregularities. If there are, investigate at once. Check the steering controls and the accelerator. The parking break and the service break should be functioning correctly.



The drive control and tilt control must be checked to guarantee proper functioning in both reverse and forward. Test the functioning of the lowering control and hoist, and the attachment control. Test the horn and lights. After that check the wipers, heater and defroster to make sure they are working smoothly. Check each gauge to ascertain that it is reading within functional limits.

• Yale Narrow Reach Forklifts West Valley City
  Yale provides a range of very narrow aisle forklifts that are specifically made for maximum storage density. These very narrow aisle forklift are ideally suited for case picking and pallet handling in applicants varying from... More
• Carelift Zoom Boom West Valley City
  Rough terrain forklifts have been produced by CareLift Equipment, ever since the year 1962. Each day the company strives to deliver value and help all their customers reach their objectives as they know the bottom... More
• Nissan Reach Forklift West Valley City
  During the development of the RG Series, a lot of interviews were done by logistic managers and many truck operators. The corporation has also carried out lots of studies on ergonomics and repetitive strain injuries.... More
• Manitou Outdoor Forklift West Valley City
  Most businesses that are in the warehousing or shipping and receiving industries use lift trucks on a daily basis. This handy piece of industrial machine is capable of performing numerous tasks. Maintain and take care... More
• Doosan IC Forklifts West Valley City
  How to Utilize a Forklift Lift trucks are material handling equipment which could move loads. Most commonly, these equipment are used in certain industries to move heavy materials in a wide variety of settings such... More